Saudi Carbon Monitoring provides power and utilities emissions measurement support in Saudi Arabia, defining the source, fuel, generation and operating evidence that power and energy facilities need. We scope and coordinate the work, and licensed or qualified parties deliver the field testing, laboratory work and GHG accounting.
You receive a written proposal setting out the scope, methods, responsibilities, lead time and price. Request a quotation
Power and utility assets depend on consistent source, fuel, generation and operating data. Combustion units, backup generators, flares or process sources may need measurement, while inventory calculations need matched fuel and output records.
Continuous emissions monitoring equipment supply, regulatory permitting and formal GHG accounting are related but separate workstreams, and the proposal identifies which is included and who is responsible. Our support does not replace the permit, approved method or regulatory decision that applies to your facility.
Define units, sources and operating modes
Create a register of turbines, boilers, engines, heaters, stacks, control systems, fuel streams and auxiliary equipment. Record capacity, fuel, operating hours, start-up and shutdown conditions, load range, emissions controls and available instrumentation. Link units to generation or output data and maintenance history.
Source-test planning identifies the decision, pollutants, method, sampling location, load, run duration and simultaneous operating data. A test at one load does not automatically represent all dispatch conditions.
Power and utilities emissions measurement: stack testing and CEMS evidence
Stack and stationary-source testing provides periodic evidence under defined conditions. CEMS can provide continuous or high-frequency data when installed, operated, quality-assured and maintained for the intended requirement. One does not universally replace the other.
Monitoring equipment can be sourced per project, while Saudi Carbon Monitoring addresses how results feed performance and inventory evidence. Applicable Saudi authority requirements, calibration or audit procedures and data-validity rules are confirmed with the licensed or qualified parties involved.
Align fuel, output and emissions
Fuel quantity, composition or heating value, generation, auxiliary load and operating status should be time-aligned with measurement. Reconcile meter totals with custody, invoice or tank data where appropriate. Record standard conditions and unit conversions explicitly.
For Scope 1, the GHG practitioner selects measured or factor-based methods and annualises data. For purchased electricity used by auxiliary facilities, Scope 2 treatment may apply under the approved boundary. Avoid double counting onsite generation and imports.
Measure performance accurately
Operational indicators can include heat rate, fuel per output, source-emission rate, valid-data capture and control-system status. Engineering interpretation considers load, ambient conditions, fuel and maintenance. A trend does not prove causation or an efficiency improvement.
The industrial energy and resource performance service can establish baselines, while data QA/QC protects source evidence.
Scope inputs
Provide the Saudi asset location, unit list, fuels, generation and utility diagrams, stack/CEMS details, permit or corporate requirements, operating modes, previous tests, fuel and output data, reporting purpose and schedule. This service is available for projects across Saudi Arabia, including Riyadh, Jeddah, Dammam, Jubail and major developments.
Evidence handover for utilities
Create a unit-level evidence pack that aligns test runs, CEMS periods, fuel data, generation, load and control-system status. Include a timeline of outages, maintenance, fuel changes and significant operating events. The technical reviewer can then identify which measurements represent which operating states and whether separate factors are needed.
- For corporate reporting, provide approved monthly aggregates with valid-data coverage and the underlying reconciliation.
- For operational review, retain higher-resolution data and engineering context.
Give the inventory team a data dictionary for raw control-system tags, and keep GHG methodology decisions with the accounting practitioner. A responsibility matrix between operations, testing, data, engineering and accounting keeps those decisions with the right people.
Change triggers
Repeat the technical review after fuel changes, control modifications, major maintenance, meter or CEMS replacement, new permit conditions or sustained changes in dispatch. Update the source and data register with effective dates. This keeps annualisation and performance comparisons tied to the equipment actually operating, rather than to a legacy test or factor.
For procurement, require a unit-by-unit method table, valid-data rules, raw-data handover and named technical reviewers. Separate equipment, installation, field testing, laboratory, calculation and regulatory interfaces. This prevents a monitoring hardware quote from being mistaken for a complete emissions-measurement and inventory solution.
Frequently asked questions
Who provides power and utilities emissions measurement in Saudi Arabia?
Saudi Carbon Monitoring provides power and utilities emissions measurement support across Saudi Arabia. We scope and coordinate the programme, and licensed or qualified parties deliver the field testing and laboratory work.
Does power plant emissions measurement need both CEMS and periodic stack testing?
Not universally. The applicable requirement and quality programme determine the role of each evidence source.
Which load should be tested?
The test plan selects load and conditions based on the purpose and applicable method. Several conditions may be needed.
Can fuel data replace measurement?
For some inventory calculations, an approved factor-based method may use fuel data. Compliance or performance questions may still require direct measurement.
How are start-up and shutdown emissions treated?
Record them separately when relevant and apply the approved regulatory or inventory method. Do not merge them invisibly with normal operation.
What affects the cost of power and utilities emissions measurement?
Cost depends on the number of units and sources, the methods required, load conditions, CEMS or fuel-data integration, laboratory work and the handover needed. The quotation sets out the scope and price.
How long does emissions measurement for a power facility take?
Duration depends on unit count, load and operating-mode coverage, access and permit arrangements, laboratory turnaround and the handover required. Lead time is confirmed in each quotation.
Saudi Carbon Monitoring serves projects across Saudi Arabia, including Dammam, Al Khobar, Jubail, Riyadh, Jeddah, NEOM and Qiddiya.
Next step
For power and utilities emissions measurement in Saudi Arabia, send us your unit list, fuels and reporting purpose. Request a quotation